7 Amp 2 STEP Kit - Chrysler Big Block 383 V8
128 Timing Curves & 2 Rev Limiters (Launch & Max RPM)
7 AMP 2-STEP Kit - Chrysler Big Block 383 V8, N.A. This ICE Ignition kit is for the Chrysler Big Block 383 V8 engines fitted with the following ...
Secure Payment Methods
Calculate Shipping
7 AMP 2-STEP Kit - Chrysler Big Block 383 V8, N.A.
This ICE Ignition kit is for the Chrysler Big Block 383 V8 engines fitted with the following
-
Carburettor(s) - including electronic carburettor(s).
-
No forced induction or nitrous.
This ICE Ignition kit is ideal for most street and race cars. The Rev Limiter provides insurance against accidentally over-revving your engine. This kit can also be used with electronic carburettors that control "Air and fuel" only. The Digital Inductive Spark technology delivers the most powerful spark and longest duration of any ignition system. More spark means greater tuneability, which leads to improved performance.
The 2-STEP Rev Limiter is ideal for cars with a trans-brake. Alternatively, it can be used as a "Valet Mode." Hide a switch in your car and connect it to the 2-STEP. Set the RPM to a lower RPM than the MAX Rev Limiter. Once active, the 2-STEP takes precedence over the MAX Rev Limiter. It's an ideal way of protecting your investment when handing over your prized possession to someone else.
The ICE Ignition 7 AMP 2-STEP Control Box
The ICE Ignition 7062MC Street / Race Series Control Box features the following.
-
128 Pre-programmed ignition curves—128 push-button selectable curves enable real-time timing adjustment. It eliminates the need for distributor re-graphing when engine upgrades are introduced and allows you to adjust timing for changes in fuel quality. The tuning potential is almost endless, with 128 timing curves at your disposal.
-
MAX REV Limiter - A push-button selectable rev limiter that can be adjusted in 100 RPM increments. It provides great insurance against accidentally over-revving your engine by cutting out the spark.
-
2-STEP Rev Limiter—This push-button selectable rev limiter can be adjusted in 100 RPM increments. It only becomes active when 12 volts are applied to the white wire in the ignition wiring loom. When active, the 2-STEP takes precedence over the Max REV Limiter. It's ideal if you have a trans brake or launch control, or it could be used as a Valet Mode.
The controller must be mounted inside your car, NOT your engine bay. ICE Ignition recommends the use of NON-RESISTOR Spark Plugs.
Why choose the ICE Ignition 7062MC Kit?
-
128 timing curves provide excellent tuning capability
-
Two Rev Limiters - One for launch control and one for over-rev protection
-
The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system.
-
It's ideal for most street-driven cars and provides great tunability.
-
Push-button selectable timing makes distributor re-graphs obsolete.
-
Push-Button selectable Rev Limiter protects your engine from being accidentally overrevved.
-
The 2-STEP Rev Limiter is ideal for cars with a trans-brake or could be used as a launch control or "Valet Mode."
-
It can also be used with electronic carburettors that control "Air & Fuel" only.
-
More spark means greater tuneability, which leads to improved performance.
-
Three-Year Australian Warranty, made in Melbourne
Our Value-Add Service
Need help establishing a base tune for your engine? We can help with engine timing (i.e., base timing and curve selection), spark plug selection, and spark plug gap for all customers who purchase an ICE Ignition kit through Gear Campus. Please get in touch with us via eBay Message when ordering your ICE Ignition kit.
What's in the ICE Ignition Kit?
This ignition kit includes the following
-
7062MC Controller - 128 pre-defined push-button selectable timing curves, push-button selectable MAX REV & 2-STEP Rev Limiters.
-
ICE Ignition SMALL Cap (4" Diameter) Billet Distributor— If you prefer a LARGE CAP Distributor (5" approx), please include the following in the Customer Comments section during checkout: "Please supply this kit with a LARGE CAP Distributor." This is a NO-COST option
-
ICE Ignition 9MMRBCU Pro 100 9 mm DIY Lead Set—A partially finished lead set is supplied as it is challenging to supply a finished set of leads due to tight fitment around the engine. This lead set is supplied with 8 x 90-degree and 8 x Straight Spark Plug Boots for the perfect fit. The leads are cut extra long. Lead crimpers are required.
-
The ICE Ignition 4200 Pro Series Race Coil has twice the energy of a standard coil and is ideal for naturally aspirated engines.
-
Wiring Loom - It's approx. 2 metres long and is easy to install.
We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2-year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.
The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.
Product Features & Benefits
* You will save money by not having to re-graph your distributor every time you upgrade your engine.
* More spark and duration delivers greater tune-ability leading to improved performance.
* MAP sensor delivers improved fuel economy under cruising conditions.
* Avoid engine pinging scenarios through bad fuel by instantly adjusting your engine's timing.
* Rev limiter provides insurance against over-revving saving you thousands of dollars in unwanted engine repairs.
* Three Year Warranty for street applications, Two Year Warranty for race applications
Engine Type: | Chrysler Big Block 383 |
Fuel Delivery: | Carburettor(s) - including Electronic Carburettor(s) |
Engine Setup: | Naturally Aspirated engines |
Controller: | 7 AMP 2 STEP |
Controller Features: | 128 curves, 2-Step & Max REV Limiters |
Wiring Loom: | Included, approx 2 meters long |
Distributor Diameter: | Approx 4" |
Distributor Triggering: | Hall Effect Sensor |
Distributor Shaft: | 4130 Chromoly |
Distributor Cap Type: | HEI / MALE Post |
Dist. Plug Wire Retainer: | Included |
Spark Plug Boot Type: | 8 x 90-Degree & 8 x Straight Spark Plug Boots |
Ignition Lead Diameter: | 9 mm |
Coil Type: | ICE Ignition 4200 Coil |
Lead Markers & install tool: | Included |
SKU | IK72NVSNRBCU |
Barcode # | 2000000004877 |
Brand | ICE Ignition |
Shipping Weight | 9.2000kg |
Shipping Width | 0.460m |
Shipping Height | 0.380m |
Shipping Length | 0.380m |
Shipping Cubic | 0.066424000m3 |
Unit Of Measure | ea |
Recommended Products
What our Customers are Saying
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.