ICE Ignition Distributor & Ignition Leads - Ford Windsor 351 V8

ICE Ignition Billet Distributor with built-in Hall Effect Sensor. This distributor is sold as part of a complete kit. It can only be used on engines with an ICE Ignition Control Box. You can purchase this separately if you are replacing an old ICE Distributor. ​Please select from the following options:

• Engine Camshafts – The MOST critical selection is identifying the type of camshaft in your engine. This distributor is designed to suit various camshafts, including flat tappet or roller camshafts. Please select the appropriate camshaft from the options list. If you are unsure, please call us on 1300 722 580
• LARGE or SMALL Cap Distributor - You also have a "No Cost" option of choosing a SMALL (4" diameter) or LARGE (5" diameter) Cap Distributor. We always recommend using a LARGE Cap Distributor as it includes a Heavier Duty Rotor Button.  Also, the post spacing is further apart, reducing the risk of crossfire. Ultimately, choosing a LARGE Cap Distributor depends on the available engine space. If you are unsure, please call us on 1300 722 580.

​​Please Note: The ICE Ignition Distributor is NOT a direct factory replacement, it will NOT work unless connected to an ICE Ignition Control Box. Please do not order this product unless you have an ICE Ignition system in the car and need to replace the distributor.

9FOR810; Late Ford 289-351 Windsor, HEI Dist & Coil, around covers

The ICE Ignition 9FOR810 Pro 100 Series Ignition Leads will suit all Ford 289-351 Windsor engines with a: 

• FIRING ORDER 1 3 7 2 6 5 4 8
•   MALE Post Distributor          MALE Post Coil
•         45 Deg. Spark Plug Boots          fit around the valve covers.

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

• More spark means a bigger explosion in the combustion chamber, this improves performance.
• ICE Ignition leads / Plug Wires ensure this by minimising resistance in the leads.
• They are superconductive with an ultra-low resistance of 100 ohms per metre. 
• ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
• The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
• They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
• The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
• The ICE Ignition 9FOR810 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!
• Plug wire markers with an easy-to-install tool included. This ensures correct ignition lead installation.

WHAT'S IN THE BOX? 

• 1 x ICE Ignition Pro Series Distributor
• 8 x ICE Ignition 9FOR810 Pro 100 Series Ignition Leads
• 1 x ICE Ignition 9FOR810 Pro 100 Series Coil Lead
• 1 x ICE Ignition 2800 Plug Wire Markers
• Instruction Sheet
• "ICE Ignition Plug Wires" Sticker