ICE Ignition Pro 100 9 mm DIY Leads - Chrysler BB 426ci & 440ci Raised Block, 90 Deg or Straight Spark Boots

The ICE Ignition 9MM90U-RBC Pro 100 Ignition Leads suits the Chrysler 426ci & 440ci Raised Block V8 with:

• MALE Post Distributor             MALE Post Coil
• 90 Degree Spark Plug Boots or Straight Spark Plug Boots

You can tailor this lead set to suit your needs at no further cost. You can change the following. 

• Lead Colour: BLACK (default), RED, BLUE
• Distributor Post in Car: MALE POST (default), FEMALE POST 
• Coil Post in Car: MALE POST (default), FEMALE POST

The ICE Ignition 9MM90U Pro 100 Series Ignition Leads / Plug Wires are a partially finished set of leads; one end is terminated, and the boots are fitted. The kit includes plugs and terminals required to finish the leads. To finish the leads, all you have to do is:

1. Install the finished end on your engine.
2. Route your ignition leads/plug wires to create the perfect look.
3. Trim the leads to the required length.
4. Complete the terminals and boots installation as per the provided instructions.

If you don't have a crimper, we recommend buying the ICE Ignition 2700 Plug Wire Crimpers. They suit the ICE Ignition 8 mm & 9 mm leads and give the perfect cut, strip and crimp every time. They are available as an option when you purchase your leads. The kit includes a set of numbered plug wire markers with an easy-to-install tool. This ensures correct ignition lead & spark plug installation.

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

• More spark means a bigger explosion in the combustion chamber, this improves performance.
• ICE Ignition leads / Plug Wires ensure this by minimising resistance in the leads.
• They are superconductive with an ultra-low resistance of 100 ohms per metre. 
• ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
• The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
• They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
• The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
• The ICE Ignition 9MM90U Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!
• Plug wire markers with an easy-to-install tool included. This ensures correct ignition lead installation.

WHAT'S IN THE BOX? 

• 2 x 800 mm ICE Ignition 9MM90U Pro 100 Series Ignition Leads
• 2 x 950 mm ICE Ignition 9MM90U Pro 100 Series Ignition Leads
• 2 x 1,100 mm ICE Ignition 9MM90U Pro 100 Series Ignition Leads
• 2 x 1,250 mm ICE Ignition 9MM90U Pro 100 Series Ignition Leads 
• 1 x 900 mm ICE Ignition 9MM90U Pro 100 Series Coil Lead 
• 9 x 90 Degree Stainless Steel "Snap Lock" terminals
• 8 x 90 Degree Distributor Boots
• 1 x 90 Degree Coil Boot
• 1 x ICE Ignition 2800 Plug Wire Markers
• Instruction Sheet
• "ICE Ignition Plug Wires" Sticker